Product · Conveyor belt monitoring
ScanInSpec™ conveyor belt scanner
A robust, non-contact system that measures the condition of your conveyor belt and puts the results in front of your maintenance team so problems are found before they stop production.
Designed and manufactured in British Columbia, Canada.
Non-contact
Hall Effect sensors
Real-time
Results available immediately
On demand or continuous
Operator-controlled scanning
Cloud reporting
View, share and compare scans
Why ScanInSpec
Belt condition data your team can rely on
ScanInSpec replaces periodic visual inspection with measurement. Every scan reports what is actually happening in the belt, in conditions where people cannot safely or consistently look.
Accurate, non-contact measurement
Hall Effect sensor technology reads the belt without touching it, so the scan is repeatable and nothing wears against the belt surface.
Results in real time
Scan data is available immediately, allowing timely responses and action instead of waiting on a report or a scheduled inspection.
Built for harsh conditions
Industrial hardware, a sealed enclosure and a wide operating temperature range keep the system working wherever the belt runs.
Optional cloud reporting
Online processing lets you view and share results, run advanced analysis and compare against previous scans of the same belt.
Reporting
From scan to report in one view
Scans are presented as clear belt condition reports with distance markings, so an entire length of belt can be reviewed at a glance and problem areas located precisely.
- Visual belt condition reports marked by distance along the belt
- Share scans online with maintenance and operations teams
- Compare current results with previous scans to track change over time
- Advanced processing available through the online interface
Deployment
Mount once. Monitor continuously.
The scanner installs permanently on any conveyor belt and runs unattended from its embedded system, so monitoring does not depend on someone walking the line.
- Permanent installation on any conveyor belt
- Remote, unattended scanning via the embedded system
- Take scans on demand or monitor belt condition continuously
- Fast, straightforward deployment on existing conveyors
How it works
Three steps to a clearer picture of your belt
1
Install
Mount the scanner on the conveyor belt. The system is designed for quick, straightforward deployment on existing infrastructure.
2
Scan
Trigger a scan when your operator needs one, or leave the system to monitor belt condition continuously in the background.
3
Review and act
Read the results on site or through the optional cloud interface, then schedule maintenance based on what the belt is actually doing.
At a glance
System overview
ScanInSpec is configured for the belt and site it monitors. Tell us about your conveyor and we will recommend the right arrangement, mounting and reporting setup.
Ask about your application| Sensing method | Non-contact, Hall Effect sensor technology |
|---|---|
| Measured condition | Conveyor belt condition along the scanned length |
| Operation | Operator-triggered scans or continuous monitoring |
| Data availability | Real-time after each scan |
| Deployment | Permanent installation on any conveyor belt, with an embedded system for unattended operation |
| Reporting | Scan reports with distance markers; optional cloud viewing, sharing and advanced processing |
| Environment | Designed for harsh industrial conditions across a wide temperature range |
See what ScanInSpec finds on your belt
Talk to our team about a scan, pricing and deployment options. The ScanInSpec system is available directly through Cascade Technologies.